LATEST NEWS ABOUT LUVERRE QUARTZ

Home / News / How To Deal with Scratches on Quartz Glass Tubes

How To Deal with Scratches on Quartz Glass Tubes

Views: 0     Author: Site Editor     Publish Time: 2025-06-24      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
How To Deal with Scratches on Quartz Glass Tubes

Quartz glass is widely used in laboratory equipment, fiber optic communication, semiconductor manufacturing, and other fields due to its excellent transparency, high temperature resistance, and chemical stability. However, during use, scratches may appear on the surface of quartz glass, which not only affects its appearance but also may reduce its optical performance and mechanical strength.

So what are the methods of dealing with scratches on quartz glass tubes?


How to deal with scratches on quartz glass


1. Surface polishing

For minor scratches, you can use the surface polishing method to repair them. This method usually requires professional polishing equipment and technicians to operate. The steps are as follows:

- Cleaning: First, thoroughly clean the quartz glass tube to ensure there is no dust or impurities left.

- Polishing: Use a fine-grained polishing agent with a soft cloth or a special polishing wheel to gently polish the scratches until they become less noticeable.

- Polishing: Continue to treat the surface with finer polishing materials (such as cerium oxide) to restore its smoothness and flatness.

- Cleaning and inspection: After polishing, clean the quartz glass again and carefully check the processing effect.


How to deal with scratches on quartz glass sheets


2. Chemical etching

Chemical etching is a method of removing a very thin layer of material from the surface of quartz glass using specific chemical reagents, thereby smoothing out surface scratches. This method is suitable for very fine scratches. When operating, it is necessary to choose the appropriate chemical solution and strictly control the reaction time and temperature to avoid damaging the quartz glass. Common etching solutions include hydrofluoric acid (HF), but it must be used with caution due to its high corrosiveness.


How to deal with scratches on quartz glass rods


3. Heat treatment

For some deeper but limited-width scratches, you can try the method of heat treatment. Use a flame or an infrared heater to slowly move along the scratch, so that the quartz glass is locally heated and melted, and then quickly cooled. This can make the melted glass flow again and fill the scratch. This process requires precise control of temperature and cooling speed, otherwise it may cause the glass to break or deform.


How to deal with scratches on quartz glass plates


4. Replace

If the scratches are too deep or have already affected the function of the quartz glass tube, the most direct and effective way is to replace it with a new one. Although this may not be the most economical choice, it is necessary to ensure the accuracy of experimental data and the safety of the equipment.


How to deal with scratches on quartz glass crucible


Note:

- In any case, please make sure to wear appropriate safety equipment, such as goggles and gloves, before dealing with scratches on quartz glass tubes.

- For those who don't have professional skills, it's best to send the damaged quartz glass to a professional repair institution for processing.

- Different types, types of scratches may require different treatment methods, so you should first evaluate the specific situation of the scratches before deciding on a treatment plan.


How to deal with scratches on quartz glass discs


When dealing with scratches on quartz glass tubes, you need to choose the appropriate method according to the actual situation. Whether you use physical means or chemical methods, you should act cautiously and ensure safety first. When encountering difficult problems to solve, seeking help from professionals is always the wisest choice.


Custom Quartz Glass Manufacture


Luverre Quartz is a manufacturer specializing in quartz tubes and other quartz items.We have over 18 years experience with the production of quartz tubes, we will be your reliable partner on quartz tubes and other quartz items.

Luverre Quartz can manufacture customized quartz tubes in various shapes, such as spiral, square, round, with processing including cutting, bending, welding, etc., and available in different colors, such as transparent quartz tubes, opaque quartz tubes, milky white quartz tubes, red quartz tubes, and so on.


CONTACT US INQUIRE NOW

QUICK LINKS

PRODUCT CATEGORY

CONTACT US

Add: 1st floor Runlian industrial center No. 116 QuFeng Rd., Haizhou Economic and technological development zone Lianyungang City, Jiangsu Province, China 222062
WhatsApp: +86-13961398430
Tel: +86-518-85528012
Phone: +86-13961398430
CONTACT US INQUIRE NOW
Copyright    2022 Luverre(LYG) Technology Co., Ltd. All rights reserved.  Sitemap | Support By Leadong.